Texas Instruments recommends a 4-layer PCB with a solid ground plane, and to keep the analog and digital signals separate. The datasheet provides a recommended layout and routing guide, but it's also recommended to consult with TI's application notes and layout guidelines for more detailed information.
The DS3680N requires a clean and stable power supply, and proper decoupling is crucial. TI recommends using a low-ESR capacitor (e.g. 10uF) close to the device, and a 1uF capacitor on the output. Additionally, a 0.1uF capacitor on the input is recommended. It's also important to ensure the power supply is well-regulated and has a low noise floor.
The maximum clock frequency for the DS3680N is 100 MHz, but it's recommended to operate at a lower frequency (e.g. 50 MHz) to ensure reliable operation and minimize power consumption. The clock frequency also depends on the specific application and the quality of the clock signal.
The DS3680N has a maximum junction temperature of 150°C, and it's recommended to keep the device temperature below 125°C for reliable operation. TI recommends using a thermal pad or heat sink to dissipate heat, and to ensure good airflow around the device. It's also important to follow proper PCB design and layout guidelines to minimize thermal resistance.
The DS3680N can be programmed using a variety of methods, including JTAG, SPI, and I2C. TI recommends using the TI Flash Programmer software and a compatible programmer (e.g. XDS100v3) for programming and debugging. It's also important to follow the programming guidelines and protocols outlined in the datasheet and application notes.
DS3680N datasheet
by Texas Instruments
Findchips
Findchips