DS2502P-E48+T&R datasheet by Maxim Integrated Products

DS2502P-E48+T&R Frequently Asked Questions (FAQs)

• What is the recommended operating temperature range for the DS2502P-E48+T&R?
  The recommended operating temperature range for the DS2502P-E48+T&R is -40°C to +85°C.
• How do I ensure reliable communication with the DS2502P-E48+T&R?
  To ensure reliable communication with the DS2502P-E48+T&R, make sure to follow the 1-Wire protocol specifications, use a pull-up resistor on the DQ pin, and ensure that the master device is generating a valid reset pulse.
• What is the maximum number of devices that can be connected to a single 1-Wire bus?
  The maximum number of devices that can be connected to a single 1-Wire bus is limited by the bus capacitance and the pull-up resistor value. As a general rule, up to 10 devices can be connected to a single bus, but this number can be increased with the use of repeaters or buffers.
• How do I handle errors during data transmission with the DS2502P-E48+T&R?
  To handle errors during data transmission with the DS2502P-E48+T&R, implement error detection and correction mechanisms, such as CRC checks and retries, in your application code.
• What is the typical current consumption of the DS2502P-E48+T&R?
  The typical current consumption of the DS2502P-E48+T&R is around 1.5mA during active operation, but this can vary depending on the specific application and operating conditions.