Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    DS2433 datasheet by Dallas Semiconductor

    • 4K-Bit 1-Wire EEPROM
    • Scan
    • No
    • Unknown
    • Transferred
    • Powered by Findchips Logo Findchips

    DS2433 datasheet preview

    DS2433 Frequently Asked Questions (FAQs)

    • Theoretically, up to 256 devices can be connected to a single 1-Wire bus, but in practice, the maximum number is limited by the bus capacitance, wire length, and noise tolerance. A typical limit is around 10-20 devices.
    • To ensure reliable communication, use a strong 1-Wire signal driver, keep the bus capacitance low, use twisted pair or shielded cable, and implement error checking and retries in your software. You can also use repeaters or hubs to extend the bus length.
    • No, the DS2433 is designed to operate from 2.8V to 3.3V. Operating the device at 5V can cause damage or malfunction. Use a voltage regulator or level shifter to ensure the correct voltage supply.
    • In rare cases, multiple devices may have the same ROM ID due to manufacturing variations. To handle this, use a unique identifier such as the device's serial number or a custom ID programmed into the device's EEPROM.
    • The DS2433's EEPROM is specified to retain data for at least 10 years at 25°C, but this can vary depending on factors such as temperature, humidity, and usage patterns. For critical applications, consider using a more robust data storage solution.
    Supplyframe Tracking Pixel