DS1706SESA/T&R datasheet by Maxim Integrated Products

DS1706SESA/T&R Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the DS1706SESA/T&R?
  The recommended operating voltage range for the DS1706SESA/T&R is 2.7V to 5.5V.
• How do I ensure reliable communication with the DS1706SESA/T&R over the I2C bus?
  To ensure reliable communication, make sure to use a pull-up resistor on the SCL and SDA lines, and ensure that the I2C bus is properly terminated. Also, ensure that the clock frequency is within the recommended range of 100 kHz to 400 kHz.
• What is the maximum current rating for the DS1706SESA/T&R?
  The maximum current rating for the DS1706SESA/T&R is 10mA per pin, with a total device current limit of 50mA.
• How do I handle the power-on reset (POR) and brown-out reset (BOR) features of the DS1706SESA/T&R?
  The POR and BOR features are enabled by default. To disable them, tie the POR/BOR pin to VCC. To use them, leave the pin floating or tie it to GND.
• What is the purpose of the address pins (A0, A1, A2) on the DS1706SESA/T&R?
  The address pins (A0, A1, A2) allow multiple DS1706SESA/T&R devices to share the same I2C bus. By setting the address pins to different values, each device can be uniquely addressed.