Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    DS1302S datasheet by Dallas Semiconductor

    • Trickle Charge Timekeeping Chip
    • Scan
    • No
    • Unknown
    • Transferred
    • Find it at Findchips.com

    DS1302S datasheet preview

    DS1302S Frequently Asked Questions (FAQs)

    • A 0.1uF capacitor between VCC and GND, and a 1kΩ resistor between VCC and RST can be used to ensure a clean power-on reset.
    • When the battery is reinserted, the DS1302S will retain its previous time and date. However, it's recommended to reinitialize the clock and set the time and date again to ensure accuracy.
    • The DS1302S can operate with a clock frequency up to 1MHz, but it's recommended to use a 32.768kHz crystal oscillator for optimal performance and accuracy.
    • Regularly update the clock with an accurate time source, and use a high-quality crystal oscillator with a low frequency tolerance (e.g., ±20ppm) to minimize clock drift.
    • No, the DS1302S is designed to work with a non-rechargeable lithium battery (CR2032 or equivalent). Using a lithium-ion battery may cause damage to the device.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel