The DRV104PWP can operate from -40°C to 125°C, but the maximum junction temperature (TJ) should not exceed 150°C.
The DRV104PWP requires a single 5V supply (VCC) and a 3.3V or 5V logic supply (VDD). Ensure that the power supplies are decoupled with 0.1uF and 10uF capacitors.
The EN (enable) pin is an active-high input that enables or disables the device. When EN is high, the device is enabled, and when EN is low, the device is disabled.
The DRV104PWP can be configured for half-bridge or full-bridge operation by connecting the appropriate pins. For half-bridge, connect the HBEN pin to VCC, and for full-bridge, connect the FBEN pin to VCC.
The DRV104PWP can handle a maximum current of 1A per channel, but the actual current rating depends on the application and the PCB design.