The recommended operating voltage range for the DF005S is 2.5V to 5.5V, although it can tolerate up to 6.5V for short periods.
To ensure proper power-on and power-off, it's recommended to use a power sequencing circuit to ensure that the input voltage (VIN) is stable before applying the enable signal (EN).
The maximum current the DF005S can handle is 5A, but it's recommended to keep the current below 4A for optimal performance and to prevent overheating.
Choose an output capacitor with a low ESR (Equivalent Series Resistance) and a capacitance value between 10uF to 22uF. A ceramic capacitor with an X5R or X7R dielectric is recommended.
The EN pin is used to enable or disable the regulator. When EN is high, the regulator is enabled, and when EN is low, the regulator is disabled and the output is turned off.
