The maximum clock frequency that can be used with the CY7C9235-270JC is 27 MHz. However, it's recommended to check the specific application and system requirements to ensure the clock frequency is within the recommended range.
The CY7C9235-270JC is a programmable device, and the bus width can be configured through the use of external resistors or by programming the device through the JTAG interface. Refer to the datasheet and application notes for specific configuration details.
The power consumption of the CY7C9235-270JC depends on the operating frequency, voltage, and other factors. According to the datasheet, the typical power consumption is around 150 mW at 27 MHz with a 3.3V supply voltage. However, it's recommended to check the specific application and system requirements to ensure accurate power consumption estimates.
The CY7C9235-270JC is designed to operate at 3.3V, and it's not recommended to use it in a 5V system without proper voltage regulation and level shifting. Using the device at 5V may damage the device or affect its performance.
The CY7C9235-270JC has a dedicated reset pin (RST) that can be used to reset the device. The reset pin can be connected to a push-button or a reset generator IC to implement a reset function. Refer to the datasheet and application notes for specific implementation details.
CY7C9235-270JC datasheet
by Cypress Semiconductor
Findchips
Findchips