The maximum cable length supported by the CY7C68320C-100AXC is 3 meters (10 feet) for full-speed devices and 1 meter (3.3 feet) for low-speed devices.
To implement the CY7C68320C-100AXC in a self-powered hub, you need to connect the VBUS pin to the power source, and ensure that the hub is powered on before the downstream devices are connected.
The CY7C68320C-100AXC can provide up to 500mA of current to downstream devices, but this may vary depending on the specific application and power requirements.
The CY7C68320C-100AXC can be configured for high-speed or full-speed operation by setting the appropriate values in the device's configuration registers. Refer to the datasheet for specific register settings and configuration options.
The CY7C68320C-100AXC has a maximum junction temperature of 150°C. Ensure that the device is properly heat-sinked and that the operating temperature is within the recommended range to prevent overheating and ensure reliable operation.
CY7C68320C-100AXC datasheet
by Cypress Semiconductor
Findchips
