The maximum cable length supported by the CY7C68013A-100AXI is 3 meters (10 feet) for full-speed devices and 1 meter (3.3 feet) for low-speed devices.
To implement a custom USB device class, you need to develop a custom device class driver and modify the device firmware to support the custom class. You can refer to the Cypress Semiconductor's EZ-USB FX2 Technical Reference Manual for more information.
No, the CY7C68013A-100AXI is not designed to be used as a USB hub. It is a USB microcontroller that can be used to implement a USB device or a USB On-The-Go (OTG) device, but it does not have the necessary hardware to function as a USB hub.
The CY7C68013A-100AXI supports a maximum data transfer rate of 480 Mbps, which is the maximum data transfer rate for a USB 2.0 device.
The CY7C68013A-100AXI can be programmed using the Cypress Semiconductor's EZ-USB FX2 Development Kit, which includes a software development kit (SDK) and a programming tool called the Cypress Control Center.
CY7C68013A-100AXI datasheet
by Cypress Semiconductor
