CY7C63613C-SXCT datasheet by Cypress Semiconductor

CY7C63613C-SXCT Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the CY7C63613C-SXCT?
  The maximum cable length supported by the CY7C63613C-SXCT is 3 meters (10 feet) for USB 2.0 and 1 meter (3.3 feet) for USB 3.0, assuming a good quality cable and a well-designed system.
• How do I configure the CY7C63613C-SXCT for USB 3.0 operation?
  To configure the CY7C63613C-SXCT for USB 3.0 operation, you need to set the USB3_EN pin high and ensure that the VBUS pin is connected to a 5V power source. Additionally, you may need to adjust the signal termination and routing to meet USB 3.0 signal integrity requirements.
• Can I use the CY7C63613C-SXCT with a non-USB interface, such as I2C or SPI?
  No, the CY7C63613C-SXCT is a USB-specific device and is not designed to work with non-USB interfaces like I2C or SPI. It is optimized for USB 2.0 and USB 3.0 operation only.
• What is the power consumption of the CY7C63613C-SXCT?
  The power consumption of the CY7C63613C-SXCT depends on the operating mode and the speed of the USB interface. In USB 2.0 mode, the typical power consumption is around 150 mA, while in USB 3.0 mode, it is around 300 mA. However, the actual power consumption may vary depending on the system design and usage.
• Is the CY7C63613C-SXCT compatible with USB On-The-Go (OTG) devices?
  Yes, the CY7C63613C-SXCT is compatible with USB OTG devices. It supports both host and device modes, and can operate as a USB OTG device when connected to a USB OTG host.