The maximum operating temperature range for CY7C425-10AXC is -40°C to +85°C.
The CY7C425-10AXC requires a 10 MHz clock signal, which can be generated using an external crystal oscillator or a clock generator IC. The clock signal should be connected to the CLK pin (Pin 1) of the device.
The recommended power-up sequence for CY7C425-10AXC is to apply power to the VCC pin (Pin 20) first, followed by the clock signal, and then the reset signal (if used). This ensures proper initialization of the device.
The CY7C425-10AXC can be configured for asynchronous or synchronous operation by setting the SYNC pin (Pin 14) high or low, respectively. In asynchronous mode, the device operates independently of the clock signal, while in synchronous mode, the device operates in sync with the clock signal.
The CY7C425-10AXC supports a maximum data transfer rate of 10 Mbps.
CY7C425-10AXC datasheet
by Cypress Semiconductor
