CY23EP09SXC-1HT datasheet
by Cypress Semiconductor
2.5V or 3.3V, 10-220-MHz, Low Jitter, 9-Output Zero Delay Buffer; Voltage (V): 2.5/3.3 V; Frequency Range: 10 MHz to 220 MHz; Outputs: 9; Operating Range: 0 to 70 C
The recommended operating temperature range for the CY23EP09SXC-1HT is -40°C to +85°C.
The CY23EP09SXC-1HT requires a 25 MHz clock signal, which can be generated using an external crystal oscillator or a clock generator IC. The clock signal should be connected to the XIN pin.
The maximum frequency for the I2C interface on the CY23EP09SXC-1HT is 400 kHz.
The CY23EP09SXC-1HT can be reset by pulling the RESET pin low for a minimum of 10 ns. The device will reset and restart its operation after the RESET pin is released.
The power consumption of the CY23EP09SXC-1HT depends on the operating frequency and mode. In active mode, the typical power consumption is around 1.5 mA at 25 MHz. In standby mode, the typical power consumption is around 10 μA.
CY23EP09SXC-1HT datasheet
by Cypress Semiconductor
