CD74HCT367E datasheet by Texas Instruments

CD74HCT367E Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of CD74HCT367E?
  The maximum operating frequency of CD74HCT367E is 30 MHz, but it can vary depending on the system design and capacitive loading.
• How do I ensure signal integrity when using CD74HCT367E in a high-speed application?
  To ensure signal integrity, use a low-impedance PCB design, minimize trace lengths, and add termination resistors as needed. Also, consider using a signal integrity analysis tool to simulate and optimize your design.
• Can I use CD74HCT367E in a 5V system?
  Yes, CD74HCT367E is compatible with 5V systems, but it's essential to ensure that the input signals do not exceed the maximum rating of 5.5V to prevent damage to the device.
• How do I handle power sequencing when using CD74HCT367E in a system with multiple power rails?
  To prevent latch-up or damage, ensure that the VCC pin is powered up before the input signals, and that the input signals are stable before the VCC pin is powered down. A power sequencing controller or a simple RC circuit can be used to achieve this.
• What is the recommended layout and routing for CD74HCT367E to minimize EMI and noise?
  Use a compact layout, keep the device close to the power supply, and route the signals away from the power supply and other noisy components. Also, use a ground plane and add decoupling capacitors as needed to reduce EMI and noise.