CD74HC241M96 datasheet by Texas Instruments

CD74HC241M96 Frequently Asked Questions (FAQs)

• What is the maximum operating frequency of CD74HC241M96?
  The maximum operating frequency of CD74HC241M96 is 25 MHz, but it can vary depending on the output load and supply voltage.
• How do I handle the power-up and power-down sequencing of CD74HC241M96?
  It is recommended to power up the VCC pin before the input signals and power down the VCC pin after the input signals to prevent unwanted output states.
• What is the recommended termination scheme for CD74HC241M96?
  The recommended termination scheme for CD74HC241M96 is to use a 50-ohm pull-up resistor to VCC for each output, and a 50-ohm pull-down resistor to GND for each output.
• Can I use CD74HC241M96 in a 3.3V system?
  Yes, CD74HC241M96 can operate from 2V to 6V, making it suitable for 3.3V systems. However, the output voltage levels may not be fully compatible with 3.3V logic levels.
• How do I handle the thermal management of CD74HC241M96?
  The thermal management of CD74HC241M96 can be handled by using a heat sink, thermal pad, or thermal interface material to dissipate heat. The maximum junction temperature is 150°C.