The maximum frequency of operation for the CD74HC22106E is typically 25 MHz, but it can vary depending on the specific application and operating conditions.
To ensure proper power supply, connect VCC to a stable 2V to 6V power source, and GND to a reliable ground connection. Also, make sure to decouple the power supply with a 0.1uF capacitor to reduce noise and ensure stable operation.
The CD74HC22106E can sink or source up to 25mA of current per output, but it's recommended to limit the current to 10mA or less to ensure reliable operation and prevent overheating.
The asynchronous reset input (MR) should be tied to VCC through a pull-up resistor (typically 1kΩ to 10kΩ) to ensure that the device is properly reset. A low signal on MR will reset the device, and a high signal will allow normal operation.
The propagation delay time for the CD74HC22106E is typically around 10ns to 20ns, depending on the specific application and operating conditions. This delay time should be considered when designing the system's timing and synchronization.
