CD74HC14M96G4 datasheet by Texas Instruments

CD74HC14M96G4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD74HC14M96G4?
  The recommended operating voltage range for the CD74HC14M96G4 is 2V to 6V, with a typical voltage of 5V.
• How do I handle the Schmitt trigger inputs to prevent oscillation?
  To prevent oscillation, ensure that the input signals have a slew rate of at least 10mV/ns and use a pull-up or pull-down resistor to define the input state when the input signal is not present.
• What is the maximum frequency of operation for the CD74HC14M96G4?
  The maximum frequency of operation for the CD74HC14M96G4 is typically 25MHz, but this can vary depending on the operating voltage and load conditions.
• How do I ensure that the output signals are not affected by noise or electromagnetic interference (EMI)?
  To minimize the effects of noise and EMI, use a decoupling capacitor between the power supply pins, keep the input and output signals away from each other, and use a shielded cable or PCB layout to reduce electromagnetic radiation.
• Can I use the CD74HC14M96G4 in a 3.3V system?
  Yes, the CD74HC14M96G4 can be used in a 3.3V system, but the output voltage will be limited to 3.3V, and the input threshold voltage may be affected.