The maximum frequency of operation for the CD74HC08EE4 is typically around 25 MHz, but it can vary depending on the specific application and operating conditions.
To ensure proper operation, the CD74HC08EE4 should be powered with a stable voltage supply between 2V and 6V, with a recommended operating voltage of 5V. Additionally, decoupling capacitors should be used to filter out noise and ensure stable power supply.
The input voltage threshold for the CD74HC08EE4 is typically around 1.5V for a logic high and 0.5V for a logic low, but it can vary depending on the specific application and operating conditions.
Yes, the CD74HC08EE4 can be used in a 3.3V system, but the input voltage threshold may be slightly higher than 1.5V. Additionally, the output voltage may not reach the full 3.3V, so it's recommended to check the datasheet and application notes for specific guidance.
The propagation delay of the CD74HC08EE4 is typically around 10-20 ns, depending on the specific application and operating conditions. To handle the propagation delay, engineers can use clock stretching, pipelining, or other techniques to ensure that the output is properly synchronized with the input.
CD74HC08EE4 datasheet
by Texas Instruments
