CD74ACT02M datasheet by Texas Instruments

CD74ACT02M Frequently Asked Questions (FAQs)

• What is the maximum frequency of operation for the CD74ACT02M?
  The maximum frequency of operation for the CD74ACT02M is typically around 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the CD74ACT02M is properly powered?
  To ensure proper operation, the CD74ACT02M should be powered with a stable voltage supply between 4.5V and 5.5V, with a maximum current draw of 20mA per gate.
• What is the propagation delay for the CD74ACT02M?
  The propagation delay for the CD74ACT02M is typically around 10-15ns, but this can vary depending on the specific operating conditions and load capacitance.
• Can I use the CD74ACT02M in a 3.3V system?
  While the CD74ACT02M is specified for 5V operation, it can be used in a 3.3V system with some limitations. However, the output voltage levels may not be compatible with 3.3V logic, and the noise margin may be reduced.
• How do I handle the input and output pins during power-up and power-down?
  To prevent damage to the device, it's recommended to tie the input pins to a valid logic level during power-up and power-down, and to ensure that the output pins are not driven during these transitions.