CD74AC10E datasheet by Texas Instruments

CD74AC10E Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CD74AC10E?
  The recommended operating voltage range for the CD74AC10E is 2V to 6V, with a typical voltage of 5V.
• How do I handle the input pins when they are not in use?
  When the input pins are not in use, they should be tied to a valid logic level (either VCC or GND) to prevent them from floating and causing unwanted switching.
• What is the maximum frequency of operation for the CD74AC10E?
  The maximum frequency of operation for the CD74AC10E is typically around 100 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the CD74AC10E is properly powered?
  To ensure proper powering of the CD74AC10E, make sure to decouple the power supply lines with capacitors (e.g., 0.1 μF) and provide a stable voltage source with minimal noise and ripple.
• Can I use the CD74AC10E in a 3.3V system?
  Yes, the CD74AC10E can be used in a 3.3V system, but the output voltage levels may not be as high as those in a 5V system. Additionally, the device's power consumption may be higher at 3.3V.