The CD4053BEE4 can operate up to 10 MHz, but the actual frequency of operation depends on the specific application and the quality of the signal being switched.
To minimize signal distortion, ensure that the input signal is properly terminated, use a low-impedance output driver, and keep the signal paths as short as possible. Additionally, consider using a buffer amplifier to isolate the signal source from the multiplexer.
The CD4053BEE4 has a maximum voltage rating of 20V, but the recommended operating voltage range is 5V to 15V. Exceeding the maximum voltage rating can damage the device.
To reduce power consumption, consider using a lower supply voltage, reducing the clock frequency, and using a low-power mode when the device is not in use. Additionally, consider using a power-down mode or a shutdown pin to reduce power consumption when the device is not in use.
The typical on-resistance of the CD4053BEE4 is around 100 ohms, but this can vary depending on the specific application and operating conditions.
CD4053BEE4 datasheet
by Texas Instruments
