CC1111F32RSP datasheet by Texas Instruments

CC1111F32RSP Frequently Asked Questions (FAQs)

• What is the recommended crystal oscillator frequency for the CC1111F32RSP?
  The recommended crystal oscillator frequency for the CC1111F32RSP is 26 MHz. This frequency is used as the clock source for the microcontroller and the radio frequency (RF) transceiver.
• How do I configure the CC1111F32RSP for optimal RF performance?
  To configure the CC1111F32RSP for optimal RF performance, ensure that the PCB layout is optimized for RF, use a 50-ohm impedance matching network, and adjust the transmitter power and modulation settings according to the application requirements.
• What is the maximum transmission power of the CC1111F32RSP?
  The maximum transmission power of the CC1111F32RSP is +10 dBm (10 mW). However, the actual transmission power can be adjusted using the transmitter power control register.
• How do I implement frequency hopping spread spectrum (FHSS) with the CC1111F32RSP?
  To implement FHSS with the CC1111F32RSP, use the device's built-in frequency synthesizer and configure the frequency hopping sequence using the device's registers. The CC1111F32RSP supports up to 16 frequency channels.
• What is the maximum data rate supported by the CC1111F32RSP?
  The maximum data rate supported by the CC1111F32RSP is 500 kbps. However, the actual data rate can be adjusted depending on the application requirements and the modulation scheme used.