CC1110F32RSPG3 datasheet by Texas Instruments

CC1110F32RSPG3 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the CC1110F32RSPG3?
  The recommended operating voltage range for the CC1110F32RSPG3 is 2.0 V to 3.6 V, with a typical voltage of 3.0 V.
• How do I configure the CC1110F32RSPG3 for optimal RF performance?
  To configure the CC1110F32RSPG3 for optimal RF performance, ensure that the PCB layout follows the recommended guidelines, use a 50-ohm impedance matching network, and optimize the transmission power and data rate for your specific application.
• What is the maximum transmission power of the CC1110F32RSPG3?
  The maximum transmission power of the CC1110F32RSPG3 is +10 dBm (10 mW), but this can be adjusted using the PA_TABLE register to optimize power consumption and range.
• How do I implement frequency hopping with the CC1110F32RSPG3?
  To implement frequency hopping with the CC1110F32RSPG3, use the FHSS (Frequency Hopping Spread Spectrum) mode, which allows you to hop between 79 channels in the 2.4 GHz band. You can configure the hopping sequence and dwell time using the FHSS registers.
• What is the maximum data rate supported by the CC1110F32RSPG3?
  The maximum data rate supported by the CC1110F32RSPG3 is 500 kbps, but this can be adjusted using the MDMSCTRL register to optimize data rate and power consumption for your specific application.