The maximum power supply voltage that can be applied to the CA741CE is ±18V. Exceeding this voltage can cause damage to the device.
Yes, the CA741CE can be used in single-supply applications, but the input common-mode voltage range is limited to within 3V of the positive supply rail. Additionally, the output voltage swing will be reduced.
The CA741CE can source or sink up to 25mA of output current. However, the output current should be limited to 10mA or less to ensure stable operation.
The CA741CE has a relatively high input bias current of 500nA. To compensate for this, a resistor network can be used to balance the input currents. Alternatively, an op-amp with lower input bias current can be considered.
The CA741CE has a bandwidth of 1MHz, making it suitable for low-to-moderate frequency applications. However, it may not be suitable for high-frequency applications due to its limited slew rate and gain-bandwidth product.
