The BYT60P-1000 can withstand a maximum surge current of 100A for 10ms, as per the IEC 61000-4-5 standard.
To ensure proper cooling, the BYT60P-1000 should be mounted on a heat sink with a thermal resistance of less than 10°C/W. Additionally, the ambient temperature should be kept below 50°C.
The recommended PCB layout for the BYT60P-1000 involves placing the device near the power source, using a solid ground plane, and keeping the high-current paths as short as possible.
Yes, the BYT60P-1000 can be used in parallel to increase the current rating, but it is essential to ensure that the devices are properly matched and that the current sharing is balanced.
The derating curve for the BYT60P-1000 is typically provided in the application notes or can be obtained from STMicroelectronics' technical support. It provides the maximum allowable current at different ambient temperatures.
