The BUZ20 can operate safely between -40°C to 150°C, but the maximum junction temperature (Tj) should not exceed 150°C.
Proper cooling can be achieved by using a heat sink with a thermal resistance of less than 10 K/W, and ensuring good airflow around the device.
The recommended gate resistor value is between 10 ohms to 100 ohms, depending on the specific application and switching frequency.
Yes, the BUZ20 is suitable for high-frequency switching applications up to 100 kHz, but the user should ensure that the device is properly cooled and the gate drive circuit is optimized for high-frequency operation.
Overvoltage protection can be achieved using a voltage clamp or a zener diode, while overcurrent protection can be achieved using a current sense resistor and a comparator or a dedicated overcurrent protection IC.