Texas Instruments provides a recommended PCB layout in the AMC7823IRTARG4 evaluation module user's guide, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The AMC7823IRTARG4 has a programmable gain amplifier (PGA) that can be configured using the SPI interface. The gain settings can be programmed using the PGA_GAIN register, which allows for gain settings from 1 to 128. Refer to the datasheet for the specific gain settings and programming details.
The AMC7823IRTARG4 has a maximum input voltage range of ±10.5V, which is the absolute maximum rating. However, the recommended input voltage range is ±5V to ensure optimal performance and linearity.
The AMC7823IRTARG4 has a thermal pad that must be connected to a thermal plane on the PCB to ensure proper heat dissipation. Texas Instruments recommends using a thermal interface material (TIM) and a heat sink to further improve thermal management. Refer to the datasheet for thermal management guidelines.
The AMC7823IRTARG4 has a power-on reset (POR) timing of 10ms, which is the time it takes for the device to reset and become operational after power-up. This timing is specified in the datasheet and is important to consider when designing the power-up sequence for the system.
AMC7823IRTARG4 datasheet
by Texas Instruments
