The recommended operating temperature range for the AM26S10CDR is -40°C to 85°C. However, it's essential to note that the device can operate up to 125°C for short periods, but this may affect its reliability and lifespan.
To ensure proper power supply, connect the VCC pin to a stable 3.3V or 5V power source, and the GND pin to a solid ground. Additionally, decouple the power supply with a 0.1uF ceramic capacitor and a 10uF electrolytic capacitor to minimize noise and voltage drops.
The maximum current rating for the AM26S10CDR is 100mA. However, it's recommended to keep the current consumption below 50mA to ensure reliable operation and minimize heat generation.
The AM26S10CDR can be configured for I2C or SPI communication by setting the MODE pin accordingly. For I2C, connect the MODE pin to VCC, and for SPI, connect it to GND. Additionally, ensure the correct pin connections and clock frequencies for the chosen communication protocol.
The RESET pin is an active-low input that resets the device when pulled low. It's essential to connect the RESET pin to a 10kΩ pull-up resistor and a 0.1uF capacitor to ensure proper reset functionality.
AM26S10CDR datasheet
by Texas Instruments
Findchips
Findchips