AM26LS33ACDG4 datasheet by Texas Instruments

AM26LS33ACDG4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the AM26LS33ACDG4?
  The recommended operating voltage range for the AM26LS33ACDG4 is 4.5V to 5.5V, although it can operate from 3V to 6V with reduced performance.
• How do I ensure the AM26LS33ACDG4 is properly terminated for high-speed data transmission?
  To ensure proper termination, use a 100-ohm differential termination resistor (RT) between the output pins (OUT+ and OUT-) and a 50-ohm single-ended termination resistor (RT/2) from each output pin to ground.
• What is the maximum data rate supported by the AM26LS33ACDG4?
  The AM26LS33ACDG4 supports data rates up to 33 Mbps, making it suitable for high-speed applications such as USB, FireWire, and Ethernet.
• How do I handle the power-down mode (PD) pin on the AM26LS33ACDG4?
  The power-down mode (PD) pin should be connected to VCC or a logic high signal to enable the device. Connecting it to GND or a logic low signal will put the device in power-down mode, reducing power consumption.
• What is the typical power consumption of the AM26LS33ACDG4?
  The typical power consumption of the AM26LS33ACDG4 is around 15mA at 5V supply voltage, although this can vary depending on the operating frequency and output load.