AM26LS32AIDG4 datasheet by Texas Instruments

AM26LS32AIDG4 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the AM26LS32AIDG4?
  The recommended operating voltage range for the AM26LS32AIDG4 is 4.5V to 5.5V, with a typical operating voltage of 5V.
• How do I ensure the AM26LS32AIDG4 is properly terminated for high-speed applications?
  To ensure proper termination, use a 50-ohm termination resistor between the output and VCC, and a 50-ohm termination resistor between the output and GND. Additionally, use a low-inductance path for the termination resistors.
• What is the maximum data rate supported by the AM26LS32AIDG4?
  The AM26LS32AIDG4 supports data rates up to 250 Mbps, making it suitable for high-speed applications such as video transmission and high-speed data acquisition.
• How do I handle the output short-circuit current of the AM26LS32AIDG4?
  The AM26LS32AIDG4 has a short-circuit current limit of 50 mA. To handle this, ensure that the output is not short-circuited for extended periods, and use a current-limiting resistor or fuse in series with the output if necessary.
• What is the recommended layout and routing for the AM26LS32AIDG4 to minimize EMI and noise?
  To minimize EMI and noise, use a multi-layer PCB with a solid ground plane, keep the signal traces short and away from the edge of the board, and use a shielded cable or twisted pair for the output signal. Additionally, use a common-mode choke or ferrite bead to filter the output signal.