AM26C32MFKB datasheet by Texas Instruments

AM26C32MFKB Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for the AM26C32MFKB?
  The maximum operating temperature range for the AM26C32MFKB is -40°C to 125°C.
• How do I ensure the AM26C32MFKB is properly powered?
  The AM26C32MFKB requires a single 5V power supply, and it's recommended to use a decoupling capacitor of 0.1 μF to 1 μF between the VCC and GND pins to ensure proper power supply decoupling.
• What is the maximum data transfer rate for the AM26C32MFKB?
  The maximum data transfer rate for the AM26C32MFKB is 32 Mbps.
• How do I handle the output enable (OE) pin?
  The output enable (OE) pin should be tied low to enable the output drivers. When OE is high, the output drivers are disabled, and the outputs are in a high-impedance state.
• What is the purpose of the DIR pin?
  The DIR pin determines the direction of data transfer. When DIR is low, the device operates in the transmit mode, and when DIR is high, the device operates in the receive mode.