DC/DC Converter - Product Weight (grams): 1.5; Input voltage min (V): 4.5; Input voltage max (V): 5.5; Output voltage min: 15; Output voltage max: 15; Output voltage dual assymetric (y/n): Single; Output Power (W): 1; Max Output current (A): 0.067; Efficiency (%): 82; Max Capacitive load (µF): 220; Package type: SIP4; Mounting: PCB; W (in): 0.24; L (in): 0.46; H (in): 0.4; W (mm): 6; L (mm): 11.68; H (mm): 9.7; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1000; EMC compliance 2: EN 55032 Class B; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; MTBF (h): 1121000; Derating : 85; Voltage Accuracy (%): ±3; Line Regulation (% of Vin): ±1.2% per 1% Vin Change; Load Regulation %: ±10; Ripple & Noise (mV p-p): 100; Switching Frequency typ (KHz): Variable 80; Short circuit protection: Momentary
Aimtec recommends a 2-layer PCB with a solid ground plane on the bottom layer and a thermal relief pattern on the top layer to ensure optimal thermal performance.
To ensure reliable operation in high-temperature environments, ensure that the device is operated within the recommended temperature range, and consider using a heat sink or thermal interface material to reduce thermal resistance.
Aimtec recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF for optimal performance and stability.
Yes, the AM1S-0515SZ can be used in a parallel configuration to increase output current, but ensure that the devices are matched and synchronized to prevent oscillations and ensure stable operation.
Aimtec recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF for optimal performance and stability.
AM1S-0515SZ datasheet
by Aimtec
