DC/DC Converter - Product Weight (grams): 1.5; Input voltage min (V): 2.97; Input voltage max (V): 3.63; Output voltage min: 15; Output voltage max: 15; Output voltage dual assymetric (y/n): Single; Output Power (W): 1; Max Output current (A): 0.0666; Efficiency (%): 79; Max Capacitive load (µF): 220; Package type: SIP4; Mounting: PCB; W (in): 0.24; L (in): 0.46; H (in): 0.4; W (mm): 6; L (mm): 11.68; H (mm): 9.7; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 3000; EMC compliance 2: EN 55032 Class B; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; MTBF (h): 1121000; Derating : 85; Voltage Accuracy (%): ±3; Line Regulation (% of Vin): ±1.2% per 1% Vin Change; Load Regulation %: ±10; Ripple & Noise (mV p-p): 100; Switching Frequency typ (KHz): Variable 80; Short circuit protection: Momentary
Aimtec recommends using a minimum of 10uF to 22uF low-ESR ceramic capacitors at the input to ensure stable operation and minimize input ripple.
The AM1S-0315SH30Z is rated for operation up to 85°C, but derating is required above 70°C. Consult the datasheet for specific derating curves and ensure proper thermal management in your design.
Follow the recommended land pattern and soldering guidelines in the datasheet. Ensure the module is soldered to a thermally conductive PCB material, and use a soldering iron with a temperature of 260°C to 280°C.
The AM1S-0315SH30Z has a typical efficiency of 85% to 90% depending on the input voltage and output load. Consult the datasheet for specific efficiency curves.
Yes, the AM1S-0315SH30Z can be used in redundant or parallel configurations, but ensure proper synchronization and ORing diode implementation to prevent back-feeding and ensure reliable operation.
AM1S-0315SH30Z datasheet
by Aimtec
