AM1L-2405S-NZ datasheet by Aimtec

AM1L-2405S-NZ Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal thermal performance?
  Aimtec recommends a PCB layout with a solid ground plane and a minimum of 2 oz copper thickness to ensure optimal thermal performance. Additionally, keeping the component away from heat sources and using thermal vias can help to dissipate heat effectively.
• Can I use this module in a high-vibration environment?
  Yes, the AM1L-2405S-NZ is designed to withstand vibrations up to 10G peak acceleration, making it suitable for use in high-vibration environments. However, it's essential to ensure proper mounting and screw torque to prevent damage.
• What is the recommended input capacitor value and type?
  Aimtec recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the input voltage range, to ensure stable operation and minimize input ripple.
• Can I use this module in a humid or wet environment?
  The AM1L-2405S-NZ has a conformal coating to protect against humidity, but it's not designed for immersion in water. If you need to use it in a humid or wet environment, consider adding additional protection measures, such as a sealed enclosure or conformal coating.
• What is the MTBF (Mean Time Between Failures) of this module?
  Aimtec estimates the MTBF of the AM1L-2405S-NZ to be around 1.5 million hours, based on MIL-HDBK-217F calculations. However, this value may vary depending on the specific application and operating conditions.