DC/DC Converter - Product Weight (grams): 1.5; Input voltage min (V): 3; Input voltage max (V): 3.6; Output voltage min: 5; Output voltage max: 5; Output voltage dual assymetric (y/n): Single; Output Power (W): 1; Max Output current (A): 0.2; Efficiency (%): 71; Package type: SMD; Mounting: PCB; W (in): 0.44; L (in): 0.5; H (in): 0.25; W (mm): 11.2; L (mm): 12.7; H (mm): 6.25; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1000; Case material: Plastic (flammability to UL 94V-0) ; Application 4 (building automation/IoT): 1; Application 5 (Industrial): 1; MTBF (h): 980000; Derating : 85; Voltage Accuracy (%): ±5; Line Regulation (% of Vin): ±1.2; Load Regulation %: ±1.2; Ripple & Noise (mV p-p): 75; Switching Frequency typ (KHz): 100; Short circuit protection: Momentary
Aimtec recommends a PCB layout with a large copper area for heat dissipation, and a minimum of 2oz copper thickness. A thermal via array under the device is also recommended.
Aimtec recommends using a soldering iron with a temperature of 250°C to 270°C, and a solder with a melting point of 180°C to 200°C. A soldering time of 3-5 seconds is recommended.
Aimtec recommends that the input voltage deviation should not exceed ±10% of the nominal input voltage to ensure reliable operation.
Aimtec recommends using external overcurrent and overvoltage protection devices, such as fuses and TVS diodes, to protect the device from damage.
Aimtec recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of 25V or higher, as close to the device as possible.
AM1L-0305S-NZ datasheet
by Aimtec
