AM1L-0305S-NZ datasheet by Aimtec

AM1L-0305S-NZ Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal thermal performance?
  Aimtec recommends a PCB layout with a large copper area for heat dissipation, and a minimum of 2oz copper thickness. A thermal via array under the device is also recommended.
• How do I ensure the device is properly soldered?
  Aimtec recommends using a soldering iron with a temperature of 250°C to 270°C, and a solder with a melting point of 180°C to 200°C. A soldering time of 3-5 seconds is recommended.
• What is the maximum allowable voltage deviation for the input voltage?
  Aimtec recommends that the input voltage deviation should not exceed ±10% of the nominal input voltage to ensure reliable operation.
• How do I protect the device from overcurrent and overvoltage?
  Aimtec recommends using external overcurrent and overvoltage protection devices, such as fuses and TVS diodes, to protect the device from damage.
• What is the recommended input capacitor value and type?
  Aimtec recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of 25V or higher, as close to the device as possible.