DC/DC Converter - Product Weight (grams): 31; Input voltage min (V): 18; Input voltage max (V): 36; Output voltage min: 5; Output voltage max: 5; Output voltage dual assymetric (y/n): Single; Output Power (W): 15; Max Output current (A): 3; Efficiency (%): 84; Max Capacitive load (µF): 3300; Package type: 2x1; Mounting: PCB; W (in): 1; L (in): 2; H (in): 0.4; W (mm): 25.4; L (mm): 50.8; H (mm): 10.16; Min Operating temperature: -40; Max operating temperature (°C): 85; Isolation (VDC): 1500; EMC compliance 2: EN 55032 Class A; Case material: Copper; Application 4 (building automation/IoT): 1; MTBF (h): 1121000; Derating : 70; Voltage Accuracy (%): ±1; Line Regulation (% of Vin): ±0.5; Load Regulation %: ±0.5; Ripple & Noise (mV p-p): 100; Switching Frequency typ (KHz): 200; Short circuit protection: Continuous
Aimtec recommends a PCB layout with a solid copper plane underneath the module, and a minimum of 2 oz copper thickness to ensure good thermal conductivity. Additionally, a thermal via array under the module can help to dissipate heat more efficiently.
To ensure reliability in high-vibration environments, Aimtec recommends following proper PCB mounting and screw torque guidelines, as well as using a conformal coating to protect the module from moisture and contaminants. Additionally, the module's pins should be soldered securely to the PCB to prevent mechanical stress.
Aimtec recommends an output filter capacitance of no more than 10uF to prevent oscillation and ensure stable operation. Exceeding this value may lead to instability or even damage to the module.
Yes, the AM15E-2405SZ can be used in a redundant or parallel configuration, but it's essential to follow Aimtec's guidelines for synchronization and current sharing to ensure reliable operation and prevent damage to the modules.
Aimtec recommends using a fuse with a rating of 5A or less to protect the module from input overcurrent conditions. A slower-blow fuse is recommended to allow for inrush current during startup.
AM15E-2405SZ datasheet
by Aimtec
