A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the input and output tracks should be kept short and away from noise sources.
The device requires a single 3.3V power supply, and the recommended biasing is to connect the VCC pin to 3.3V through a 10uF capacitor, and the VEE pin to ground through a 10uF capacitor.
The maximum operating frequency of the ALM-1712-TR1G is 1.7 GHz, but it can be used up to 2.5 GHz with some degradation in performance.
The device has a thermal pad on the bottom, which should be connected to a thermal ground plane on the PCB. A heat sink or thermal interface material can be used to improve heat dissipation.
The device has a 50 ohm input and output impedance, and matching networks should be designed to provide a 50 ohm impedance match to ensure optimal performance.
Findchips
Findchips