ADS1014IRUGR datasheet by Texas Instruments

ADS1014IRUGR Frequently Asked Questions (FAQs)

• What is the maximum sampling rate of the ADS1014?
  The maximum sampling rate of the ADS1014 is 3,000 samples per second (SPS) for a single channel, and 1,500 SPS for multiple channels.
• How do I configure the gain settings for the ADS1014?
  The gain settings for the ADS1014 can be configured using the PGA (Programmable Gain Amplifier) bits in the Config Register. The gain can be set to 2/3, 4, 5, 6, 8, or 16.
• What is the power consumption of the ADS1014?
  The power consumption of the ADS1014 is typically 150 μA at 3.3 V, but can be as low as 50 μA in low-power mode.
• How do I interface the ADS1014 with a microcontroller?
  The ADS1014 can be interfaced with a microcontroller using the I2C bus. The ADS1014 acts as a slave device, and the microcontroller acts as the master device.
• What is the accuracy of the ADS1014?
  The ADS1014 has a typical accuracy of ±0.5% of the full-scale range, and a maximum accuracy of ±1% of the full-scale range over the entire operating temperature range.