ADS1013IRUGR datasheet by Texas Instruments

ADS1013IRUGR Frequently Asked Questions (FAQs)

• What is the maximum sampling rate of the ADS1013IRUGR?
  The maximum sampling rate of the ADS1013IRUGR is 3,000 samples per second (SPS).
• How do I configure the gain settings on the ADS1013IRUGR?
  The gain settings on the ADS1013IRUGR can be configured by writing to the CONFIG register. The gain can be set to 2/3, 1, 2, 4, 8, or 16.
• What is the power consumption of the ADS1013IRUGR?
  The power consumption of the ADS1013IRUGR is typically 150 μA at 3.3 V and 1 MSPS.
• Can I use the ADS1013IRUGR with a 5 V power supply?
  No, the ADS1013IRUGR is designed to operate with a power supply voltage between 2.0 V and 3.6 V. Using a 5 V power supply may damage the device.
• How do I interface the ADS1013IRUGR with a microcontroller?
  The ADS1013IRUGR communicates with a microcontroller through a serial interface (SPI or I2C). The device can be connected to the microcontroller's SPI or I2C bus, and data can be transferred using the appropriate protocol.