A good PCB layout for the ACPL-064L-060E involves keeping the input and output circuits separate, using a ground plane, and minimizing the length of the signal traces. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure reliability in high-temperature applications, it's essential to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive material for the PCB, and keeping the device within its recommended operating temperature range.
The ACPL-064L-060E has built-in ESD protection, but it's still important to follow proper ESD handling procedures during assembly and testing. This includes using an ESD wrist strap, ESD mat, and ESD-protected packaging.
While the ACPL-064L-060E is designed for isolated applications, it can be used in non-isolated applications with proper circuit design and layout. However, this may compromise the device's isolation performance and reliability.
It's recommended to use a 10uF to 22uF decoupling capacitor between the VCC and GND pins of the ACPL-064L-060E, with a voltage rating that matches the supply voltage. This helps to reduce noise and ensure stable operation.
ACPL-064L-060E datasheet
by Avago Technologies
Findchips
