The recommended operating voltage range for the 74V2G32STR is 1.65V to 5.5V, although it can operate down to 1.2V with reduced performance.
It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
The maximum frequency of operation for the 74V2G32STR is 100MHz, although this can vary depending on the specific application and operating conditions.
It is recommended to use a series termination resistor (Rs) of 22-33 ohms for high-speed signals, and to ensure that the PCB trace impedance is matched to the output impedance of the device (typically 50 ohms).
The maximum current that the 74V2G32STR can sink or source is 24mA, although this can be limited by the specific application and operating conditions.