The recommended operating voltage range for the 74V1T126STR is 1.65V to 5.5V, as specified in the datasheet. However, it's essential to note that the device can tolerate voltage transients up to 7V without damage, but operation above 5.5V is not guaranteed.
To ensure proper power-on and power-off sequencing, it's recommended to follow the guidelines in the datasheet. Specifically, the VCC pin should be powered on before the input signals, and the input signals should be stable before the VCC pin is powered off. Additionally, the power supply should be ramped up and down slowly to prevent voltage spikes.
The 74V1T126STR can sink or source up to 24mA of current per output pin, as specified in the datasheet. However, it's essential to consider the total current consumption of the device and ensure that it does not exceed the maximum recommended current of 100mA.
To prevent electrostatic discharge (ESD) damage, it's recommended to handle the 74V1T126STR with proper ESD protection equipment, such as wrist straps, mats, and bags. Additionally, the device should be stored in a conductive bag or wrapped in conductive material when not in use.
For optimal performance and thermal management, it's recommended to follow the PCB layout guidelines in the datasheet. Specifically, the device should be placed on a solid ground plane, and the VCC and GND pins should be connected to a low-impedance power supply. Additionally, thermal vias can be used to dissipate heat, and the device should be placed away from heat sources.
74V1T126STR datasheet
by STMicroelectronics
