Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img 74HCT2G02DP,125 datasheet by NXP Semiconductors

    • Dual 2-input NOR gate - Description: PicoGate 2-Input NOR Gate; TTL Enabled ; Logic switching levels: TTL ; Number of pins: 8 ; Output drive capability: +/- 4 mA ; Power dissipation considerations: Low Power ; Propagation delay: 12 ns; Voltage: 4.5-5.5V; Package: SOT505-2 (TSSOP8); Container: Reel Pack, Reverse, Reverse
    • Original
    • Yes
    • Unknown
    • Transferred
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    74HCT2G02DP,125 datasheet preview

    74HCT2G02DP,125 Frequently Asked Questions (FAQs)

    • The recommended operating voltage range for the 74HCT2G02DP,125 is 4.5V to 5.5V, with a typical voltage of 5V.
    • It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
    • The maximum frequency of operation for the 74HCT2G02DP,125 is 100 MHz, but this can vary depending on the specific application and operating conditions.
    • The 74HCT2G02DP,125 requires proper termination to ensure signal integrity and prevent reflections. This can be achieved by using a 50Ω termination resistor at the output, and ensuring that the PCB trace impedance is matched to the output impedance of the device.
    • The maximum output current that the 74HCT2G02DP,125 can sink or source is 8mA, but this can vary depending on the specific application and operating conditions.
    Supplyframe Tracking Pixel