The maximum clock frequency of the 74HC7541DB,112 is 100 MHz, but it can vary depending on the operating voltage and temperature. It's recommended to check the timing characteristics in the datasheet for specific frequency limits.
The 74HC7541DB,112 requires a power supply voltage (VCC) of 2.0 V to 5.5 V. Ensure that the power supply is stable and within the recommended range. Also, decouple the power supply lines with capacitors to reduce noise and ensure reliable operation.
The 74HC7541DB,112 can sink or source a maximum current of 25 mA per output pin. However, the total current drawn from the device should not exceed 100 mA to prevent overheating and ensure reliable operation.
The asynchronous reset input (RST) should be asserted low to reset the device. The reset input should be synchronized with the clock signal to prevent metastability issues. It's recommended to use a pull-up resistor to ensure that the reset input is not left floating.
The propagation delay of the 74HC7541DB,112 varies depending on the operating voltage and temperature. The typical propagation delay is around 10 ns to 20 ns, but it's recommended to check the timing characteristics in the datasheet for specific delay values.
74HC7541DB,112 datasheet
by NXP Semiconductors
