The maximum frequency of operation for the 74HC4351D,652 is 100 MHz, but it can vary depending on the specific application, supply voltage, and output load.
To ensure proper termination, use a 50-ohm termination resistor between the output and VCC, and a 50-ohm termination resistor between the output and GND. This will help to reduce signal reflections and improve signal integrity.
The recommended power-on sequence is to apply VCC before applying any input signals. This helps to prevent unwanted output states during power-up.
Yes, the 74HC4351D,652 can operate with a 3.3V supply voltage, but the output voltage will be limited to around 2.7V. This may affect the signal integrity and compatibility with other devices.
During power-down, it's recommended to keep the OE pin in a high-impedance state (i.e., not driven) to prevent any unwanted output states.
74HC4351D,652 datasheet
by NXP Semiconductors
Findchips
