The maximum clock frequency for the 74HC175D,652 is 25 MHz, but it can vary depending on the operating voltage and temperature. It's recommended to check the timing diagrams and specifications in the datasheet for more information.
Yes, the 74HC175D,652 is compatible with 3.3V power supplies. It has a wide operating voltage range of 2V to 6V, making it suitable for use in a variety of applications.
To ensure proper reset during power-up, it's recommended to connect the reset pin (MR) to VCC through a pull-up resistor (typically 1kΩ to 10kΩ) and add a capacitor (typically 10nF to 100nF) from the reset pin to GND. This will ensure that the device is properly reset during power-up.
The 74HC175D,652 is rated for operation up to 125°C, but it's recommended to check the derating curves in the datasheet to ensure that the device can operate within the desired temperature range. Additionally, it's important to consider the thermal management of the device to prevent overheating.
To troubleshoot issues with the 74HC175D,652, start by checking the power supply voltage, clock signal, and reset signal. Verify that the device is properly connected and that there are no shorts or open circuits. Use a logic analyzer or oscilloscope to monitor the device's inputs and outputs, and consult the datasheet and application notes for guidance.
74HC175D,652 datasheet
by NXP Semiconductors
