74AHCT74D,118 datasheet by NXP Semiconductors

Description Dual D-type flip-flop with set and reset; positive-edge trigger - Description: Dual D-Type Flip-Flop with Set and Reset; Positive-Edge Trigger; TTL Enabled ; F<sub>max</sub>: 160 MHz; Logic switching levels: TTL ; Output drive capability: +/- 8 mA ; Power dissipation considerations: Low Power ; Propagation delay: 3.3 ns; Voltage: 4.5-5.5 V; Package: SOT108-1 (SO14); Container: Reel Pack, SMD, 13"
Datasheet Type Original
RoHS Yes
Pb Free Unknown
Lifecycle Transferred
HTS Code 8542.39.00.01
Schedule B 8542.39.00.00
Price & Stock
Powered by Findchips

Equivalent Parts !
Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

V62/03659-01YE TC74VHCT74AF(EL) 74AHCT74D 74AHCT74D MC74VHCT74AM

74AHCT74D,118 datasheet preview

The recommended operating voltage range for the 74AHCT74D,118 is 4.5V to 5.5V, with a typical voltage of 5V.
It is recommended to power up the VCC pin before the input signals, and power down the VCC pin after the input signals. This ensures that the device is properly initialized and avoids any potential latch-up or damage.
The maximum frequency of operation for the 74AHCT74D,118 is typically around 100 MHz, but this can vary depending on the specific application and operating conditions.
It is recommended to use a 0.1uF ceramic capacitor between the VCC pin and GND pin, as close to the device as possible, to decouple the power supply and reduce noise and oscillations.
The maximum current that the 74AHCT74D,118 can sink or source is typically around 8mA, but this can vary depending on the specific application and operating conditions.

74AHCT74D,118 datasheet preview Download Datasheet