74AHCT3G04DP,125 datasheet by NXP Semiconductors

74AHCT3G04DP,125 Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for the 74AHCT3G04DP,125?
  The recommended operating voltage range for the 74AHCT3G04DP,125 is 4.5V to 5.5V, with a typical voltage of 5V.
• How do I ensure the 74AHCT3G04DP,125 is properly powered and decoupled?
  To ensure proper power and decoupling, connect the VCC pin to a 5V power supply, and add a 0.1uF ceramic capacitor between VCC and GND as close to the device as possible.
• What is the maximum frequency of operation for the 74AHCT3G04DP,125?
  The maximum frequency of operation for the 74AHCT3G04DP,125 is 120 MHz, but this can vary depending on the specific application and operating conditions.
• How do I handle the input and output pins during power-up and power-down?
  During power-up and power-down, ensure that all input pins are held at a valid logic level (either VCC or GND) to prevent unwanted switching. Output pins should be left unconnected or terminated with a pull-up or pull-down resistor.
• What is the maximum current that can be sourced or sunk by the 74AHCT3G04DP,125?
  The maximum current that can be sourced or sunk by the 74AHCT3G04DP,125 is 8mA per output pin, with a total current limit of 50mA for all output pins combined.