Datasheet Archive: 74AHCT374PW,118 datasheet by NXP Semiconductors

74AHCT374PW,118 datasheet by NXP Semiconductors

Description Octal D-type flip-flop; positive edge-trigger; 3-state - Description: D-Type Flip-Flop; Postive-Edge Trigger; TTL Enabled (3-State) ; F<sub>max</sub>: 140 MHz; Logic switching levels: TTL ; Output drive capability: +/- 8 mA ; Power dissipation considerations: Low Power ; Propagation delay: 4.3 ns; Voltage: 4.5-5.5 V; Package: SOT360-1 (TSSOP20); Container: Reel Pack, SMD, 13"
Datasheet Type Original
RoHS Yes
Pb Free Unknown
Lifecycle Transferred
HTS Code 8542.39.00.01
Schedule B 8542.39.00.00
Price & Stock
Powered by Findchips

Equivalent Parts !
Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

74VHCT374MTC 74VHCT374ATTR 74VHCT374AMTCX 74AHCT374PW-T 74VHCT374MTCX

74AHCT374PW,118 datasheet preview

Download Datasheet

The recommended operating voltage range for the 74AHCT374PW,118 is 4.5V to 5.5V.
To ensure that the output signals are not distorted or delayed, it is recommended to use a decoupling capacitor of 100nF or more between the VCC and GND pins, and to keep the output load capacitance below 50pF.
While the 74AHCT374PW,118 is specified for 5V operation, it can be used in a 3.3V system with some limitations. The output voltage levels may not be fully compliant with the 3.3V standard, and the device may not meet the specified propagation delay times.
It is recommended to power up the VCC pin before applying any input signals, and to power down the VCC pin after removing all input signals. This helps to prevent unwanted output transitions and ensures proper device operation.
The maximum frequency of operation for the 74AHCT374PW,118 is 100MHz, but this can vary depending on the specific application and operating conditions.